Zone Offroad Products · ZONF85
Description
Take your F150 to new heights with this 6 lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37 tires.
Information
18 or larger diameter wheels required. Stock 17/18 wheels cannot be reinstalled. Stock 20 wheels can be used with up to a 305/60R20 tire.18 wheels with 5-5.5 of backspacing should be test fit prior to mounting tires to ensure proper tie rod end clearance.37x12.50 tires may require some trimming.Kit includes a 5 rear block kit (#F2639) that typically nets a slight tail high stance. A 4 rear block kit (#F2419) is available in the options if a more level stance is preferred.Models equipped with Auto 4wd may require front driveshaft replacement.Requires frame bracket modification.Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.Will NOT work on Diesel Models.
Component: Zone Offroad Products ZONF2418
Component: Zone Offroad Products ZONF2604
Component: Zone Offroad Products ZONF2640
Component: Zone Offroad Products ZONF2641
Component: Zone Offroad Products ZONF2650
Component: Zone Offroad Products ZONF2651
Specifications
- Weight
- 217.85 lb
- EO
- Legal US
- Life cycle
- Discontinued
- Alt. part number
- ZONF85
- AAM brand code
- ZOR
- Warehouse brand code
- ZOR
- AAIA brand code
- FQMS
Attributes
- Accommodates Factory Wheels
- See Notes
- Alternate Part Number
- ZONF85
- Back Spacing
- 5.5"
- Back Spacing 2
- 5.5"
- Back Spacing 3
- 5.5"
- California Proposition 65
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Front Lift Height
- 6"
- Front Lift Method
- Knuckle & Strut Spacer
- Installation Difficulty
- 4 out of 5
- Installation Time
- 9 hrs
- Lift Type
- Lift Kit
- Max Tire Size
- 37 x 12.5
- Max Tire Size 2
- 37 x 12.5
- Max Tire Size 3
- 37 x 12.5
- Rear Lift Height
- 5"
- Rear Lift Method
- Cast Blocks
- Requires Metal Cutting
- No
- Requires Welding
- No
- Wheel Size
- 18 x 9
- Wheel Size 2
- 20 x 9
- Wheel Size 3
- 22 x 9
Fitment status
Select a vehicle or engine to see whether this part applies to your application.
