Skip to main content

Zone Offroad Products · ZOND47

Part #: ZOND47
UPC: 810156363559

Loading availability... Loading...
Notify me when this item is in stock.

Description: Zone 5 Coil Spring Lift Kit

Description:

This is a virtual part number representing a kit with the following components: ZOND1514, ZOND1518, ZOND3504

Description

Go big and go anywhere with this 5 Lift Kit for your truck that gives you clearance for huge tires up to 35. This kit has everything you need to raise your 4WD 2000 - 2002 Dodge / Ram 1500 Truck. If you're going to do it, do it right.

Features & benefits

  • 100% bolt-on design for easy installation
  • Bump stop extensions properly limit up-travel, protecting your vehicle
  • Heavy-duty upper and lower control arms improve strength and articulation while correcting caster
  • Heavy-duty front track bar bracket correctly positions front axle under vehicle
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics

Information

Brakes: If truck is equipped with a proportioning valve a relocation bracket kit is required. Add in configuration / checkout. Check Factory Sway Bar Setup: Dodge Rams were manufactured with two different front sway bar link setups. Some were mounted ABOVE the axle bracket and some BELOW. If your model’s sway bar links are above the axle bracket, a sway bar link kit is required. Add in configuration / checkout. Check Your Rear Springs: If your vehicle is equipped with a top mounted overload/helper spring, 4 longer U-bolts may be required. Factory block is replaced with 5" block and add-a-leaf combo to obtain a level stance. Factory Sway Bar? If your vehicle is equipped with a factory rear sway bar, a rear sway bar link kit is recommended. Add in configuration / checkout. Factory wheels fit when paired with factory / original equipment tire size. Fitment: Will NOT fit models built before February 9, 1994 due to track bar stud size. Steering Stabilizer Required: Due to the factory drag link flip when installing this kit the factory steering stabilizer cannot be reinstalled. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Application summary

Year Make / model
2000-2002 Dodge Ram 2500
2000-2002 Dodge Ram 3500
Component: Zone Offroad Products ZOND1514

Brand: Zone Offroad Products

Part Number: ZOND1514

Quantity in Kit: 1

Loading availability... Loading...
Component: Zone Offroad Products ZOND1518

Brand: Zone Offroad Products

Part Number: ZOND1518

Quantity in Kit: 1

Loading availability... Loading...
Component: Zone Offroad Products ZOND3504

Brand: Zone Offroad Products

Part Number: ZOND3504

Quantity in Kit: 1

Loading availability... Loading...

Specifications

GTIN
00810156363559
Weight
162.15 lb
Height
24 in
Length
48 in
Width
40 in
EO
Legal US
Life cycle
Discontinued
Alt. part number
ZOND47
AAM brand code
ZOR
Warehouse brand code
ZOR
AAIA brand code
FQMS

Attributes

Accommodates Factory Wheels
See Notes
Adjustable
No
Alternate Part Number
ZOND47
Back Spacing
4"
Back Spacing 2
4"
Back Spacing 3
4"
California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Finish
Powdercoat
Front Lift Height
5"
Front Lift Method
Coil Springs
Installation Difficulty
2 out of 5
Installation Time
5.5 hrs
Lift Type
Lift Kit
Max Tire Size
35 x 12.5
Max Tire Size 2
35 x 12.5
Max Tire Size 3
35 x 12.5
Rear Lift Height
5"
Rear Lift Method
Add-A-Leaf & Cast Block
Requires Metal Cutting
No
Requires Welding
No
Wheel Size
16 x 8
Wheel Size 2
17 x 9
Wheel Size 3
18 x 9

Fitment status

This product is universal and will fit your application.

Application summary

2000-2002 Dodge Ram 2500; 2000-2002 Dodge Ram 3500
Retail View