ICON Vehicle Dynamics / K93053
Part #: K93053
UPC: 840103419800
Loading...
Notify me when this item is in stock.
Description: 10-14 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM; 2010-2014 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM
Description:
This is a virtual part number representing a kit with the following components: 95000L, 95000R, 95120, 95200, 98562DJ
Description
This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Features & benefits
- Key Features of the Raptor Front 3.0 Coil Over Shock:
- Replaceable Bypass Tubes That Can Easy Slide in to Position if you were to Dent or Damage One
- Direct Bolt in to OEM Location with Bypass Adjustment Knobs Easily Accessible for Tuning Adjustment
- 3.0 OEM Replacement Remote Reservoir Compression Adjustable Front Coil Over Shocks
- Special Engineered Dampened Valve Stops for Quiet and Precise Operation without the Standard Bypass Loud “Clicking” Noise you will find with Other Brands
- Multi Stage Cad Plated Finish with Polished and Anodized Top Cap / Rod Ends
- UHMH Machined Shaft & Rod End Protective Shin Guards Standard with Every Kit
- Key Features of the Raptor Upper Control Arms:
- 6061 Billet Aluminum
- Precision CNC Machined
- Patented Delta Joint (U.S. Patent No. 10,731,700)
- Com 12 PTFE Lined Bearings Ensure Maximum Strength and Durability
- Easily Adjustable on the Vehicle for Perfect Wheel Alignments
- High Precision CNC Machined Pin Provides OEM Like Fitment
- RSMX PTFE Lined 7/8” Rod Ends
- Internal Hydraulic Bump Zone Designed for Maximum G-out Control in the Last 40% of Travel
- O-ring sealed billet dust cover
- Key Features of Hydraulic Bump Stop System:
- Designed for increased leaf spring clearance so there is no loss in up travel with stock or aftermarket springs
- Easy bolt on installation without having to remove the truck bed
- 6061 Solid billet cross bar that is polished & anodized
- Bump stop striker pad does not require leaf spring disassembly
- Oversized 1” Heavy Duty CNC Machined Shock Shafts
- Comfortable on road manners with sufficient damping capability under extreme load
- Hydro-pneumatic bump stop increases bump energy capacity
- Velocity sensitive hydraulic bump stop increases the amount of energy absorbed the faster it is hit
- Reduces rear end kick and improves overall performance
- Easy-to-Adjust High Resolution Compression Adjuster Offers Fine Tuning Adjustments For All Types of Terrains
- Clamshell brackets strengthen frame in critical areas preventing frame damage from extreme off-road use
- Cross member and tension rods stabilize frame rails and prevent twisting under hard impacts
- Increases frame rigidity and improves overall vehicle dynamics
- Industry first billet cross beam
- Pre-tuned and Nitrogen charged for most Ford Raptors
- Extended Droop Travel and Increased Overall Performance on and off road
- Integrated adjustability for future ICON Raptor specific products
- Direct Bolt in to OEM Location and Optimum Reservoir Positioning for Superb Heat Dissipation and protection
- Nitrogen Charged 6063-T832 Aluminum 10” Remote Reservoirs that are Precision CNC Honed & Hard Anodized
- Adjustable Ride Height from 1 – 3” of Lift
- ICON Engineered Eibach 3 5/8” ID High Quality Chrome Silicon Steel Springs that offer increased travel and performance
- Key Features of the Raptor Rear 3.0 Bypass Shock:
- 3.0 OEM Replacement Piggyback Reservoir Zeta 3 Tube Bypass Rear Shocks
- Easy-to-Adjust Detented Adjustment Knobs Offer Quick Adjustability without the Use of Tools
- High Resolution Bypass Valves Designed for Noticeable Fine Tune Adjustments in Rebound and Compression
- High Flow CNC Machined Welded Bypass Blocks designed to Increase Fluid Flow for Enhanced Performance & High Definition Tuning
Information
Ships in multiple boxes
Application summary
| Year | Make / model |
|---|---|
| 2010-2014 | Ford F-150 |
Component: ICON Vehicle Dynamics 95000L
Component: ICON Vehicle Dynamics 95000R
Component: ICON Vehicle Dynamics 95120
Component: ICON Vehicle Dynamics 95200
Component: ICON Vehicle Dynamics 98562DJ
Specifications
- GTIN
- 00840103419800
- Weight
- 258 lb
- Height
- 8 in
- Length
- 38 in
- Width
- 10 in
- Life cycle
- Available to Order
- AAM brand code
- IVD
- Warehouse brand code
- FRDK
- AAIA brand code
- FRDK
Attributes
- AAP_UDA_12
- EA
- AAP_UDA_22
- 1
- AAP_UDA_4
- 55
- Active or Passive Suspension
- Passive
- Add-On Part
- 198001 - BILLET SPANNER WRENCH KIT
- Adjustable Compression
- Yes
- Adjustable Control Arm
- Yes
- Adjustable Damping
- Yes
- Adjustable Rebound
- Rear Only
- Bushings Included
- NO
- California Proposition 65
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Coil Spring Color
- Black
- Coil Spring Material
- Steel
- Coil Spring Maximum Inside Diameter
- 3.63
- Coils Quantity Front
- 2
- Damping Adjustment Type
- Manual
- Front Shock Body Diameter
- 3
- Front Spring Rate Type
- Linear
- Grade Type
- Performance
- Maximum Lift
- 3
- Minimum Lift Front
- 1
- Mounting Hardware Included
- Yes
- OEM Wheels & Tires Fitment
- Yes
- Rear Reservoir Style
- Piggyback
- Rear Shock Body Diameter
- 3
- Recommended Aftermarket Tires
- 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- Recommended Aftermarket Wheels
- ICON Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset
- Shocks Included
- Yes
- Spring Color
- Black
- Spring Material
- Steel
- Title
- 10-14 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM
Fitment status
Select a vehicle or engine to see whether this part applies to your application.
Application summary
2010-2014 Ford F-150
ICON Vehicle Dynamics K93053
Use arrow keys or the on-screen controls to move between images.
