ICON Vehicle Dynamics / K22103
Part #: K22103
UPC: 840103415871
Loading...
Notify me when this item is in stock.
Description: 20-UP GLADIATOR 2.5" STAGE 3 SUSPENSION SYSTEM; 2020-UP JEEP GLADIATOR JT 2.5" STAGE 3 SUSPENSION SYSTEM
Description:
This is a virtual part number representing a kit with the following components: 22021, 22025, 22061, 22062, 22066, 26523, 26527
Description
The Stage 3 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving on-road ride quality for the daily driven application that will see occasional moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).
Features & benefits
- 2.5" lift height
- 2.0 Aluminum Series shocks with vehicle specific valving
- Adjustable, billet aluminum front sway bar links
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Fits 35" tires (37" with extended bump stop spacer kit)
- 33% front, 23% rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Front lower links included for caster angle correction and improved front end articualtion
- Dual rate front coil springs with lifetime guarantee against sagging/breakage
- Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
Information
TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
Application summary
| Year | Make / model |
|---|---|
| 2020-2022 | Jeep Gladiator |
Component: ICON Vehicle Dynamics 22021
Component: ICON Vehicle Dynamics 22025
Component: ICON Vehicle Dynamics 22061
Component: ICON Vehicle Dynamics 22062
Component: ICON Vehicle Dynamics 22066
Component: ICON Vehicle Dynamics 26523
Component: ICON Vehicle Dynamics 26527
Specifications
- GTIN
- 00840103415871
- Weight
- 95 lb
- Height
- 7 in
- Length
- 21 in
- Width
- 13 in
- Life cycle
- Available to Order
- AAM brand code
- IVD
- Warehouse brand code
- FRDK
- AAIA brand code
- FRDK
Attributes
- AAP_UDA_12
- EA
- AAP_UDA_22
- 1
- AAP_UDA_4
- 55
- Add-On Part
- 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
- Bushings Included
- Yes
- California Proposition 65
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Coil Spring End 1 Type
- Open
- Coil Spring End 2 Type
- Open
- Coils Quantity Front
- 2
- Coils Quantity Rear
- 2
- Grade Type
- Performance
- Maximum Lift
- 2.5
- Mounting Hardware Included
- Yes
- OEM Wheels & Tires Fitment
- Yes
- Recommended Aftermarket Tires
- 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
- Recommended Aftermarket Wheels
- ICON Alloys | 18x9 w/ 4.5" Backspace / -12mm Offset
- Shocks Included
- Yes
- Spring Color
- Black
- Spring Material
- Steel
- Title
- 20-UP GLADIATOR 2.5" STAGE 3 SUSPENSION SYSTEM
Fitment status
Select a vehicle or engine to see whether this part applies to your application.
Application summary
2020-2022 Jeep Gladiator
