Skip to main content

Hushmat · 756442

Part #: 756442
UPC: 881101564420

Loading availability... Log in for inventory
Notify me when this item is in stock.

Description: Marine Complete 4x4x2 Transom Kit; HushMat Ultra marine sound deadening material eliminates vibrations and the second layer HushMat Silencer Megabond reduces engine and exhaust noise. Experience quiet on the water. Easy do it yourself installation. Made in the USA.

Description:

Description

HushMat, manufacturer of the easiest to install and highest performance sound deadening materials available to the automotive and marine industries provides engine cover kits to fit your in-board. Recently a customer located in Fairbanks, Alaska, took delivery of a Habercraft Jetcraft 2175XS. The initial readings were 100 to 102 decibels (noise level similar to a rock concert). Engine and exhaust noise, the jet drive, fundamental vibrations generated by both transferred through the aluminum structure. Harmonics transmitted through the aluminum hull and consoles. The first order of business was to remove the stock sound insulation which consisted of foil faced and backed one half inch bubble wrap glued with contact cement to the inside of the doghouse. Because the engine, compressor, and exhaust emitted a substantial amount of sound in the mid to high frequency range, the use of one half inch HushMat Silencer High Frequency sound absorbing foam was applied over the Ultra Mat on the inside of the engines doghouse or cover. The foam was applied on the inside of the doghouse with the exception of surfaces directly adjacent to the exhaust. After the removal of the stock bubble wrap the customer picked up the doghouse and tapped it with a hammer. It rang like a bell. After the installation of the HushMat products it was dead silent, no vibration or resonance whatsoever. The sound levels after the doghouse deadening project produced readings of 95 to 96 decibels, compared to the presound dampened readings of 100 to 102 decibels a substantial noise reduction of 5 to 7 db. The next task covered the inside of the transom, bottom of the swim platform, and underside of the rear deck with Ultra Mat and were rewarded with an additional 2 to 3 decibels noise reduction, a reading of 92 to 94 decibels was achieved. The current noise level reduction has made the use of his boat much more pleasurable for my wife, friends, our dog, and myself.

Features & benefits

  • Reduce Heat Up to 40 Percent
  • One-Step Application With HushMat Ultra-Simply Peel and Stick
  • Proven To Perform From -30 F To 550 F
  • Manufactured in the USA for Over 25 years
  • Reduce Noise Up to 50 Percent
  • Eliminate Road Noise
  • Engine Noise
  • Vibration
  • Insulates Interior
  • Requires No Pre-cleaning Of The Application Surface
  • No More Acetone Or Alcohol Surface Preparation
  • Ultra is 1.5mm and Lightweight at 0.47 lbs. Per Square Foot

Information

Reduce that aftermarket engine, exhaust drone, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, and exhaust with one USA Made material light weight HushMat Ultra

Specifications

GTIN
00881101564420
Weight
11 lb
Height
3 in
Length
26 in
Width
14 in
EO
Legal US
Life cycle
Available to Order
AAM brand code
HSM
Warehouse brand code
HSM
AAIA brand code
FGSS

Attributes

California Proposition 65
No
Cold Flexibility
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
Color
Polymer - Black; Backing - Silver
Flammability
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
Hardness
6.5 - 9.0mm - ASTM D-5
Peel Strength
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
R-Value
7
Safety
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
Shelf Life
At least 6 months when stored at 40 degrees C or less
Specific Gravity
1.47 (approx. 0.47 pounds per square foot)
Temperature Resistance
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Thickness
1.5mm
Title
HushMat Marine Transom Thermal Insulation and Deadener

Fitment status

This product is universal and will fit your application.